Description

Product Details

AUTOFIBER [HOLEY CLAY MITT] PERFORATED DECON MITT (8.5″X6″) 1 PACK

 

• Perforated clay cuts debris
• Large, fast and efficient work surface
• Fine grade for minimal paint damage

This clay glove for car paint decontamination features small flow holes that effortlessly lift and flush contaminants from your vehicle’s paint surface, while you remove embedded contaminants.

Generously and continuously apply lubrication to the bolster and paint surface. Rub on a glass surface, with lubrication, on first use, to break up the clay.

Package quantity: 1

Size: 8.5″ x 6″

Weight: 300 GSM

Mixture: 75/25

Material: mixed

Edge Type: Strip

 

Application

*To properly prepare the surface, use Nanolex Clay Lube lubricant.

 

DIRECTIONS:

Use ONLY on a cold, well-cleaned surface. DO NOT work on a surface whose temperature is below 12°C or above 65°C. ALWAYS perform the “Break-in” step before the very first use (see below for details). ALWAYS work on an inconspicuous area for first use, in case of unexpected adverse effects on the surface.

Wash and rinse the vehicle.
Spray Nanolex Clay Lube directly on the part to be decontaminated.
Wash and rinse, one section at a time, with the Holy Clay Wash Mitt using light pressure.
Start with the roof, and work the hood, the suitcase and finish with the sides of the car.
Rinse the car with water.
Dry surfaces with a clean, dry microfiber.

 

NOTE:

Sufficient lubrication is crucial for the use of Holy Clay

*Water alone is not an adequate lubricating solution.

*DO NOT use with a rotary polisher

*The Holy Clay pad is not resistant to solvents.

*Remove grease and tar from surfaces before application.